Gießpfannenschieber Typ 4200 / 6300

Complete thundish valve

Complete thundish valve Type 4200/6300

Montageplatte

Basic assembling sheet

DThe basic assembling sheet is screwed on the main frame which is welded to thundish bottom.

Wear ring

Wear ring

During operation the centering plate can be damaged. If this happens the wear ring has to be replaced.

Permanent magnets (holding magnets)

Permanent magnets (holding magnets)

The basic assembling sheet are equipped with permanent magnets to keep the head disk in position. The magnets are fixed by headless bolts. During maintenance the retention force of the magnets has to be checked.

Thundish valve housing

Thundish valve housing

The thundish valve housing guides the sliding frame

Bodenplatte-Schiebergehäuse

Floor plate for thundish valve housing with guiding and fixing elements

The floor plate is fixed to the thundish valve housing, the guiding element allow the smooth movement of the valve without any stick-slip effects

Closing devices

Closing devices

Each vale includes a closing device on both sides. This elements are under permant mechanically stress during operation and must be checked regularly and replaced if necessary.

Sliding frame

Sliding frame

Permanent magnets

Gleitrahmen

Floor plate-gliding frame with guiding and fixing elements

The floor plate is fastened at the gliding frame.

Thermodynamic springs

Thermodynamic springs

The thermodynamic springs are located at the gliding frame to push the slide disk to the head disk.

Hydraulikzylinder mit Laterne

Hydraulic cylinder with coupling

The movement of the gliding frame are controlled by the cylinder wich is coupled to the sliding frame.